ABYSS® 12V 3Ah Power Sport Lithium Starting Battery

This is a compact option for compatible small-engine starting and light electronics, including selected motorcycles, personal watercraft and kayak setups. Its small capacity makes it a practical choice where space and weight matter. Confirm the engine’s starting requirements and your accessory needs before using it as a replacement.

No. Starting output is a brief burst used to turn an engine over. The published continuous discharge rating for this model is 3.2A, so sustained loads must be sized separately. Dealers should compare the engine’s required starting performance and every accessory’s continuous draw before approving the installation.

It is intended for light electronics rather than a large accessory bank. Add the fish finder, GPS, camera and lighting loads to estimate demand, then leave a reserve for unexpected use. Display brightness, transmit settings and adapters affect runtime. Choose a larger-capacity model if several devices must run for an extended day.

Use an approved lithium-compatible charger matched to this small battery. The published standard charge current is 1A; do not assume a high-output marine charger or a lead-acid maintainer is suitable. If the battery will charge from a motorcycle or PWC, confirm the vehicle’s regulated charging output meets the battery requirements.

The enclosure’s IP67 rating provides protection against dust and temporary immersion under defined test conditions. It does not make exposed terminals or the rest of the installation waterproof. Secure the battery above standing water where practical, protect connections and inspect the installation after water exposure; avoid using the rating as permission for permanent submersion.

Compare the battery’s dimensions, terminal orientation and retention arrangement with the original installation. The published unit weighs approximately 0.7kg, but a lighter battery still needs a secure hold-down. Make sure cables reach without tension and confirm the starting and charging requirements for the exact engine model.

The listed package contains the 12V 3Ah PowerSport battery and user documentation. A charger or mounting tray is not listed as standard equipment. Confirm the complete installation parts with your dealer, including a suitable hold-down, protected wiring and any terminal adapter needed for your motorcycle, PWC or kayak.

Bluetooth monitoring is not listed for this model. Use a compatible lithium battery monitor if an ongoing charge display is important, and check charge before each outing. A gauge calibrated for lead-acid voltage may not accurately represent lithium reserve. Accessory use while the engine is off should leave enough reserve for the next start.

The published charging range starts at 0°C (32°F); warm the battery into its approved range before charging. For seasonal storage, isolate parasitic loads, follow the supplied storage instructions and check charge periodically. Low self-discharge does not prevent a tracker, alarm or connected electronic device from gradually draining a small battery.

Keep the original receipt, battery serial number and application details, and complete the required registration. Coverage follows the terms that apply to the product, purchase date and intended use. Ask ABYSS to confirm the terms for your motorcycle, PWC or fleet installation rather than assuming a marine warranty automatically covers every powersport application.